Materials Performance is the world's most widely circulated magazine dedicated to corrosion prevention and control. MP provides information about the latest corrosion control technologies and practical applications for every industry and environment.
Issue link: http://mp.epubxp.com/i/733332
A19 NACE INTERNATIONAL: VOL. 55, NO. 10 MATERIALS PERFORMANCE OCTOBER 2016 Technical Symposia Advances in CUI Technologies This symposium contains technical papers related to corrosion under insulation, coatings, insulation, metal jacketing corrosion, and control technology. Sponsoring Committee: STG 03 Chair: Art Mackinnon Vice Chair: Ray Posgay Corrosion Control for Aboveground Storage Tanks This symposium contains technical papers from tank operators, researchers, and suppliers of products and services related to corrosion mitigation and monitoring of aboveground storage tanks. Sponsoring Committee: TEG 132X Chair: Usama Jacir Vice Chair: Calvin Pynn Corrosion Issues in Military Equipment and Facilities This symposium contains technical papers that present advances in corrosion technology and research for military equipment and facilities. Focus is on new and improved materials, coatings, techniques, technologies, and applications. New corrosion technologies with applicability to military vehicles, weapon systems, ships, aircraft, support equipment, facilities, and infrastructure are included. Sponsoring Committee: STG 40 Chair: Robert Mason Direct Assessment This symposium contains technical papers on external, internal, and stress corrosion cracking direct assessment activities. Sponsoring Committee: STG 35 Chair: Joe Pikas Vice Chair: Bob Winters AC Interference, AC Induced Corrosion, Induced AC Risk Assessment, Monitoring, and Mitigation This symposium contains technical papers on alternating current (AC) interferences, AC corrosion, risk assessment of induced AC, case studies on AC corrosion, fault currents, and monitoring. Sponsoring Committee: STG 05 Chair: Dan Wagner Vice Chair: Meng Lopez-Garrity Advances in Corrosion Control in Combustion and Conversion This symposium contains technical papers about corrosion and materials technology in combustion and conversion of fossil fuels, biomass, waste fuels, waste heat recovery, and power production from concentrated solar power. Sponsoring Committee: TEG 183X Chair: Mathias Galetz Vice Chair: Joseph Meyer Environmental Assisted Cracking (Day 2) This symposium contains technical papers related to understanding of all kinds of EAC mechanisms including but not limited to hydrogen embrittlement, stress corrosion cracking, corrosion fatigue, liquid metal embrittlement, and so on. The papers cover root cause failure analysis in service, lab testing methods, materials modeling, industry standards development, state-of-the-art EAC research reviews, and so on. Sponsoring Committee: TEG 186X Chair: Xi Shan Vice Chair: Fei Tang Inhibitors—Vapor Transported (VCI) and Surface Coating a Inhibitors—Vapor Transported (VCI) and Surface Coating Rust Preventive (RP) This symposium contains technical papers that discuss advances pap This symposium contains technical papers that discuss advances in rust preventives and corrosion inhibitors, testing, method o in rust preventives and corrosion inhibitors, testing, method es in rust preventives and corrosion inhibitors, testing, method development, performance testing. Sponsoring Committees: TEG 093X and TEG 145X Chair: Jennifer Clark Vice Chair: Jim Henderson so Vice Chair: Jim Henderson Under-deposit Corrosion in Crude Oil Pipelines This symposium contains technical papers about managing under- e This symposium contains technical papers about managing under- deposit corrosion (UDC) in crude oil pipeline systems, the physics of sediment accumulation, chemical and biological corrosion processes under deposits, UDC monitoring strategies, and mitigation activities that have been found effective at combating UDC. Sponsoring Committee: TEG 092X Chair: Trevor Place Vice Chair: Shoaib Nasin Corrosion in Nuclear Systems (Day 1) This symposium contains technical papers on the corrosion and degradation of materials in nuclear systems. This includes technical papers on the understanding and mitigation of corrosion degradation in buried piping in nuclear power plants taking into consideration the complexity and congestion in the plants. On buried piping issues, the symposium features regulatory requirements and issues related to grounding, bimetallic contacts, piping isolation, decoupling, materials selection, inspection of piping and coatings, and acceptance criteria for cathodic protection in such a congested environment. Sponsoring Committees: TEG 224X and TEG 465X Chair: Megan Dahl Vice Chair: Xihua He Thursday, March 30 Advances in Materials for Oil and Gas Production (Day 2) This symposium contains technical papers that present advances in materials technology and research. Focus is on new and improved metallic materials and applications. This includes consideration and measurement of the material's performance in its envisaged exposure environment. Sponsoring Committee: STG 32 Chair: Julio Maldonado Vice Chair: Conchita Mendez Microbially Influenced Corrosion (Day 2) This symposium contains technical papers regarding microbial corrosion research, case studies, control monitoring, and treatment. Sponsoring Committee: TEG 187X Chair: Faisal Al-Abbas Vice Chair: Kenneth Wunch Nonmetallic Materials for Oil and Gas This symposium contains technical papers in the areas of organic coatings, liners, seals (elastomers and thermoplastics), insulation, and structural applications of polymers (composites and thermoplastics) with emphasis in oil and gas field services. Sponsoring Committee: STG 33 Chair: Ricardo Pardey Vice Chair: Osmay Oharriz Marine Corrosion: Past, Present & Future (Day 2) This symposium contains technical papers related to how historical events in marine corrosion have brought about the development of current technologies and practices. Sponsoring Committee: STG 44 Chair: Moavin Islam Vice Chair: Abdul Hameed Al-Hashem