Materials Performance is the world's most widely circulated magazine dedicated to corrosion prevention and control. MP provides information about the latest corrosion control technologies and practical applications for every industry and environment.
Issue link: http://mp.epubxp.com/i/123600
M AT E R I A L S S E L E C T I O N & D E S I G N FIguRE 5 References 1 A.M. Sherik, "Black Powder: Study Examines Sources, Makeup in Dry Gas System," Oil &Gas; J. 8, 11 (2008): pp. 54-59. 2 A.M. Sherik, A.L. Lewis, A.H. Rasheed, "Black Powder in Gas Transport Systems," CORROSION 2008, paper no. 08415 (Houston, TX: NACE International, 2008). 3 M.A.M. Trabulsi, "Black Powder in Sales-Gas Transmission Pipelines," J. of Pipeline Engineering 3, 8 (2007): pp. 245-250. 4 ASTM G76-07, "Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets" (West Conshohocken, PA: ASTM). 5 E. Akbarzadeh, E. Elsaadawy, A.M. Sherik, J.K. Speltc, M. Papini, "The Solid Particle Erosion of 12 Metals Using Magnetite Erodent," J. of Wear 2 (2012). A version of this article was published in Elsevier's Wear Journal in February 2012. Reprinted with permission. Measured (points) and curve ft (lines) dimensionless erosion rates for v = 90 m/s and d = 30.4 μm. Legend refers to materials abbreviations in Table 1. FIguRE 6 ABDELMOUNAM SHERIK is a research science specialist at Saudi Aramco Oil Co., Research & Development Center, Dhahran, 31311, Saudi Arabia, e-mail: abdelmounam.sherik@aramco.com. He has more than 22 years of work experience in corrosion and materials. Before joining Saudi Aramco, he worked for an integrated steel mill (DOAFSCO) and the National Research Council (NRC) of Canada. A member of NACE International and SPE, he has a Ph.D. in materials and metallurgical engineering from Queen's University in Canada and has authored more than 75 publications in international journals and conferences. EHAB EL-SAADAWY is a senior research scientist at Saudi Aramco Oil Co., Research & Development Center. He has more than 20 years of experience in experimental and computational fuid dynamics of turbulent and multiphase fows. Before joining Saudi Aramco, he worked for McMaster University, Hamilton, Ontario, Canada; and Atomic Energy of Canada, Ltd. He has a Ph.D. in aerospace engineering from Old Dominion University in Norfolk, Virginia; is a licensed professional engineer in Ontario (PEO), and has authored more than 25 publications in international journals and refereed conferences. Measured (points) and curve ft (lines) dimensionless erosion rates for v = 130 m/s and d = 30.4 μm. Legend refers to materials abbreviations in Table 1. NACE International, Vol. 52, No. 5 May 2013 MATERIALS PERFORMANCE 73